REXROTH S10P30-1X Check Valve

P90°:271 kN; Cap bolt, SAE grade:5; P150°:151 kN; PG:1/4 NPT; Housing:SAF 056 KAUA; P120°:169 kN; J1:139.7 mm; P180°:185 kN; J max.:749.3 mm; Adapter sleeve assembly:SNP 3056x10.7/16;

Design variant/feature:TQON/GW; r1,2 min.:3.3 mm; B:300 mm; D1 ≈:470 mm; Basic dynamic load rating C:4180 kN; D:736.676 mm; r3,4 min.:6.4 mm; Calculation factor Y0:1.6; Thrust factor K:1.49; Calculation factor Y2:2.5;

ba:26.988 mm; R2:15.875 mm; Stabilizing ring:SR-11-0; H2:23.813 mm; Ca:30.785 mm; Initial grease fill:39.69 g; H1:69.85 mm; R1:34.131 mm; L:244.475 mm; End plug (suffix Y):EPR 5;

Basic Dynamic Radial Load Rating C:345000 N; Fillet Radius ra:4.00 mm; D:540.0000 mm; Basic Static Radial Load Rating Co:560000 N; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:950 rpm; Sealed Speed Rating n3:600 rpm; B:65.00 mm; Oil Speed Rating Open/Shielded n2:1200 rpm; d:

A:40 mm; Hexagonal key size for grub screw N:3.175 mm; Basic dynamic load rating C:14 kN; Thread grub screw G2:1/4-28 UNF; A1:25.5 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; Housing:SYFWK 505 L; Thread length G1:12 mm; A5:22 mm;

Tolerance shaft:h9; Specific static load factor K0:80 N/mm²; Coefficient of friction µ min.:0.06; B:15 mm; Permissible sliding velocity v max.:1 m/s; d:20 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Tolerance housing:H7; D:23 mm;

B1:352 mm; d3:540 mm; B5:90 mm; Locking device:MS 3184-80; d:420 mm; Mass adapter sleeve assembly:96 kg; G3:9 mm; Hydraulic nut:HMV 84E; B:70 mm; A:4 mm;

Initial grease fill:136.08 g; End plug (suffix Y):EPR 7; P180°:22.2 kN; P150°:18.2 kN; R2:21.431 mm; A1:79.375 mm; J min.:219.075 mm; H1:82.55 mm; ba:30.163 mm; A2:118.666 mm;

r1,2 min.:3 mm; C:114 mm; Reference speed:2000 r/min; r5 min.:1 mm; Calculation factor e:0.43; l:46 mm; a:131.414 mm; Calculation factor Y0:1.6; Fatigue load limit Pu:98 kN; Limiting speed:3000 r/min;

P120°:21.8 kN; P90°:36 kN; Bearing:22216 EK; RG:3/8 NPT; Adapter sleeve assembly:SNW 16x2.5/8; Pa:7.83 kN; H:169.863 mm; Initial grease fill:87.885 g; A1:88.9 mm; Stabilizing ring:SR-16-13;

D1 ≈:701 mm; ra max.:6 mm; da max.:577 mm; Basic dynamic load rating C:6950 kN; G:Tr 500x5; Da max.:758 mm; B2 ≈:307 mm; d2 ≈:578 mm; B:248 mm; B1:295 mm;

Basic Dynamic Radial Load Rating C:44200 N; Accessories:One Seal; Sealed Speed Rating n3:2600 rpm; d:105.000 mm; D:145.0000 mm; Basic Static Radial Load Rating Co:44000 N; Grease Speed Rating Open/Shielded n1:4300 rpm; B:20.00 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm;

D:580 mm; ra max.:4 mm; Da max.:560 mm; r1,2 min.:5 mm; Calculation factor Y1:2.6; K:12 mm; G1:27 mm; d1:300 mm; da min.:331 mm; B:150 mm;

Calculation factor kr:0.2; Basic static load rating C0:8650 kN; D1 ≈:788 mm; Db max.:827 mm; Fatigue load limit Pu:610 kN; Da max.:827 mm; d:630 mm; s max.:8 mm; ra max.:5 mm; Calculation factor Y:0.4;

Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:4.4 kg; D:210 mm; a:4 mm; d:190 mm; B:80 mm; D1:225 mm; h:192 mm; Tolerance shaft:e7;